AEMK Dry Grinding and Cleaning Machine

Equipment Introduction:

This equipment is mainly used to shear scrapped steel billets,square steels,I-beams,channel steels,steel pipes,and large light metal structural parts made of steel into scrap steel suitable for furnace charges.It is an ideal equipment for steel mills,non-ferrous metal smelting industries, precision casting industries,and raw material manufacturers.

Main technical parameters：

I. Technical Parameters of Q91Y-660 Scrap Steel Gantry Shearing Machine
1	Shearing cylinder	Main cylinder	YG380/260-900		Itinerary	900 mm		330×2=660 tons
1	Shearing cylinder	Max thrust	3300 kN×2		Quantity	2 Unit		330×2=660 tons
2	Pressure cylinder	Model	YG200/140-1000		Itinerary	1000 mm		75×2=150 tons
2	Pressure cylinder	Max thrust	750 kN×2		Quantity	2 Unit		75×2=150 tons
3	Pusher cylinder	Model	YG200/140-6000		Itinerary	6000 mm		50 tons
3	Pusher cylinder	Max thrust	250 kN		Quantity	1 Unit		50 tons
4	Flip-top cylinder	Model	YG140/100-550		Itinerary	550 mm		38×2=76 tons
4	Flip-top cylinder	Max thrust	380 kN		Quantity	2 Unit		38×2=76 tons
5	Gate dimensions (L×W×H)		6000×1600×900 mm (with lid)
6	Cut length / Min shearing opening / Max shearing opening		1700 mm / 540 mm / 850 mm
7	Feeding method		Hydraulic cylinder pusher
8	Main equipment motor power		133 kW
9	Shearing angle		11 degrees
10	Maximum shearing range (δb≤450 MPa)	Round steel: φ145 mm				Center position of blade
		Square steel: 130×130 mm
		Steel plate: 60×1600 mm
11	Number of shearing cycles		4 times/minute (theoretical value without load)
12	Servo Motor	Model	ESMG2-92D20CD	Max speed	2000 rpm		Brand: Shenzhen Huichuan
		Rated power	92.1 kW	Quantity	1 Unit
		Model	ESMG2-42D17CD	Max speed	2000 rpm
		Rated power	40.9 kW	Quantity	1 Unit
13	High-speed hydraulic pump	Model	A4V250+250	Nominal pressure	35 MPa		Brand: Guangdong Keda
		Rated displacement	500 ml/r	Quantity	1 Unit
		Model	A4V250	Nominal pressure	35 MPa
		Rated displacement	250 ml/r	Quantity	1 Unit
14	Oil cooler	Cooling type	Plate-fin air-cooled radiator (high flow rate)	Quantity	1 item
14	Oil cooler	Cooling type	Plate-fin air-cooled radiator (high flow rate)	Quantity	1 item
15	PLC	Siemens (Germany)
16	Hydraulic valve	Jining Taifeng, High-Flow Intelligent Cartridge Valve.
17	Pressure sensor	Schneider Electric (Original Import)
18	Remarks	Equipment oil: approximately 5000 liters, recommend 46# high-pressure anti-wear hydraulic oil. Upper tool holder is made of cast steel. The customer's work site needs a sealed air-conditioned room to protect the servo controller.

Overall Advantages of AEMK Gantry Shears

1. High Hydraulic System Pressure: The AEMK gantry shear's hydraulic system has a shearing pressure of 28~29MPa. While ensuring the hydraulic cylinder's designed thrust is achieved, it boasts the fastest operating speed with the same motor power, offering advantages in speed and output compared to similar products.
2. Control System with a Fast Shearing Mode: When shearing sheet metal, a single button switch to fast shearing mode shortens the cylinder's idle time, increasing shearing speed and output while reducing energy consumption.
3.High Hydraulic Cylinder Pressure Resistance: The hydraulic cylinder barrel is forged, with thick walls and few defects, resulting in high pressure resistance. The test pressure is 36.5MPa, providing a high safety factor. The shearing cylinder can operate for extended periods under a working pressure of 29MPa.

(Shearing cylinder)

4.The servo motor uses Shenzhen Huichuan, the industry's leading brand of high-power hydraulic servo motors. These motors are meticulously crafted, undergo strict quality control, ensure stable quality, and offer high speed, large torque, and long lifespan.

(Shenzhen Huichuan Servo Motor)

5.The hydraulic pump adopts the A4V high-speed axial piston pump, which has stable quality, high speed, large displacement, low noise and low failure rate.

(High-speed axial piston pump)

6.The hydraulic valve block adopts Jining Taifeng large-flow intelligent cartridge valve, which has good controllability, good sealing performance, strong pollution resistance, fast response, high working efficiency and strong stability.

(Jining Taifeng Hydraulic Valve Block)

Detailed Introduction to AEMK Hydraulic Gantry Shear

1. The wide V-shaped guide rail structure ensures a tight fit between the inner and outer slide rails, resulting in even force distribution. The inner high-wear-resistant cast copper slide rail is wear-resistant, has low resistance, and a long service life. The outer four corner triangular slide rails are inlaid with wear-resistant steel plates for durability. Furthermore, during operation, an automatic lubrication pump automatically lubricates both the inner and outer slide rails.

2.The material pressing mechanism employs a corrugated, washboard-like structure to ensure smooth operation and durability.

3.The hydraulic oil cooling system uses a plate-fin radiator, which, compared to water cooling, requires less space, eliminates water consumption, and produces no wastewater, thus meeting environmental protection requirements. Furthermore, our air-cooled radiator offers a high safety factor and provides 2-2.5 times the rated heat dissipation, resulting in superior cooling performance.

4.The power system utilizes a servo motor and features optimized design, improving output power efficiency and reducing wasted energy. This achieves energy savings of 40% for the same output.

(500-ton gantry shear pump station)

5. Before welding, the edges of the steel plates at the weld seams are beveled, and multi-layer, multi-pass welding is employed, resulting in excellent fusion and reliable weld quality.

6. The entire gantry frame is first welded and machined separately on the top, bottom, left, and right sides, then assembled and welded as a whole. This ensures the gantry frame's precision and guarantees smooth operation of the sliding track.

7. The equipment is equipped with a fully automatic control system. Core components utilize imported German Siemens PLCs and touchscreens. Operating parameters are automatically controlled, and operation is simple and easy to learn.

8. Equipment operating parameters and status are displayed intuitively on the interface, facilitating equipment monitoring, maintenance, and debugging. The entire operation requires no manual intervention; one-button start and stop are available. Single or multiple motors can be started independently, achieving truly fully automatic control. The equipment is easy for operators to learn.
The equipment features a fast shearing mode, activated with a single button. This avoids excessive empty shearing strokes, improving shearing efficiency and output while preventing power waste.

(Jining Taifeng Hydraulic Valve Block)

9. The main frame structure has undergone stress analysis and practical verification, ensuring a high safety factor and robust durability.

10.All hydraulic lines utilize high-pressure welding technology. The weld ends are beveled, with argon arc welding for the root pass and MIG welding for the cap pass. Surface pickling removes impurities from the inner wall, ensuring a clean hydraulic system and stable long-term operation.

(Beveling on both ends of the steel pipe)

(After pickling and phosphating the inner wall of the steel pipe)

11.The company possesses large-scale gantry milling machines and other machining equipment, capable of precision machining the entire gantry frame to ensure the machining accuracy and quality of the entire equipment.

AEMK Q91Y-660 Scrap Steel Gantry Shear

Equipment Introduction:

Main technical parameters：

Overall Advantages of AEMK Gantry Shears

Detailed Introduction to AEMK Hydraulic Gantry Shear